What are the functions of composite drainage network?

Release time:

2023-07-20

Composite drainage net has unique advantages of low price, light weight, convenient maintenance and repair. So it is very popular with everyone. In fact, when in use, a composite drainage net should be laid between the foundation and the sub-base to drain the accumulated water between the foundation and the sub-base, block the capillary water, and effectively integrate it into the edge drainage system . This structure automatically shortens the drainage path of the foundation, so its drainage time is greatly shortened, and it can reduce the use of selected foundation materials (ie, finer and less permeable materials can be used). It can prolong the service life of the road. When using the composite drainage network, we also need to know that in the northern climate, laying the drainage network can help reduce the impact of frost heave. If the freezing depth is very deep, a geonet can be laid in a shallower position of the subbase as a capillary plug. In addition, granular subbases that are less prone to frost heave and extend to freezing depths often need to be replaced. The backfill soil that is prone to frost heaving can be directly filled on the drainage pipe network. In fact, it also reaches the ground baseline during operation. In this case, you will find that the system can actually be connected to a drain that brings the water table to or below this depth. This may limit the development of ice crystals, which is not necessary to limit traffic loads when ice melts in colder regions in the spring.

There are also some important aspects to the compound traffic network. For example, a drainage network laid over the sub-base prevents sub-base fines from entering the sub-base (ie, it acts as a barrier). The aggregate base layer will go to some extent into the upper part of the geonet. In this way, you will see that its composite geotechnical drainage network also has a potential role in restricting the horizontal movement of the aggregate base. In this way, its function is similar to that of geogrid reinforcement. In general, the tensile strength and stiffness of composite geotechnical drainage grids are superior to many geogrids used for foundation reinforcement. This restraint will increase the bearing capacity of the foundation. In addition, it is important to note that after the road ages and cracks form, most of the rainwater will enter the road section.

In this case, the drainage mesh is laid directly under the road surface instead of the drainage foundation. At this point, its drainage network can collect water before it enters the foundation/sub-base. Additionally, a film can be wrapped around the bottom of the drainage network to further prevent moisture from entering the foundation. Therefore, in this case, for a rigid road system, this structure allows the road to be designed with a higher drainage coefficient CD. Another advantage of this structure is that it allows the concrete to hydrate more evenly (research into the extent of this advantage is ongoing). Whether it is a rigid road or a flexible road system, this structure can extend the service life of the road. To sum up, you will find that the composite drainage network actually works. Well, that's all for the knowledge points first, and we will bring more exciting content in the next issue. Welcome everyone to come here for field trips.

LATEST NEWS

What is the role of geomembrane?

Corrosion resistance, low temperature resistance, good cold resistance. The main mechanism is that the imperviousness of the plastic film intercepts the leakage channel of the earth dam, withstands the water pressure with greater tensile strength and elongation, and adapts to the deformation of the dam. Non-woven fabrics are also high-molecular staple fiber chemicals, which have high tensile strength and ductility through impregnation or thermal viscosity. Combining with plastic films not only increases the tensile strength and puncture resistance of plastic films, but also due to non-woven The surface of the cloth is rough, which increases the friction coefficient of the contact surface and contributes to the stability of the composite geomembrane and the protective layer. At the same time, they are highly corrosive to bacteria and chemicals, and are not afraid of acid, alkali, and salt erosion.

2023-07-20

Soft permeable pipe

Soft permeable pipe is a special pipe material, its main feature is that it has good water permeability, which can effectively drain water and reduce surface water. In urban construction and road engineering, soft permeable pipes have been widely used.

2023-07-28

Composite drainage network

Composite drainage network is a drainage system that comprehensively utilizes various drainage technologies. It combines artificial drainage system and natural drainage system to form a complete drainage network. Its purpose is to solve urban drainage problems, reduce flood disasters, and improve water resource utilization efficiency in the process of urbanization.

2023-07-28

Rough surface HDPE geomembrane

Rough HDPE geomembrane, that is, high-density polyethylene geomembrane, is a kind of anti-seepage material commonly used in engineering construction. It has a certain rough texture, which can increase the friction with other materials and improve the stability and anti-slip performance of the geomembrane. The following will introduce the characteristics, application fields and construction precautions of the rough HDPE geomembrane.

2023-07-28

Waterproof board

The anti-drainage board is a protection facility used to prevent water from infiltrating the building or the surface, and is usually installed in the basement of the building, underground pipelines, etc. It can effectively prevent the infiltration of surface water or groundwater, and ensure the structural safety and service life of buildings.

2023-07-28

Geocell

A geocell is an engineering structure used for soil improvement and soil and water conservation. It is usually composed of geotechnical materials, such as geotextiles, geonets and geomembranes. The main function of geocells is to increase the shear strength and stability of the soil and prevent geological disasters such as soil erosion and landslides. The characteristics, application and construction process of geocells will be introduced in detail below.

2023-07-28

Email : longxiang@lxgeosynthetics.com
Tel：+86-15253450100
WhatsApp：+86 15806884562
Add : West of Nanshou Road, Xingguo Street, Lingcheng District, Dezhou City

WeChat